Direct-Vent systems mount on an outside wall and have a vent-within-a-vent system to draw in outdoor air to support combustion and exhaust flue products to the outdoors. The vent cap installs on the outside wall of the home. Because they do not draw your already-heated room air to support combustion, Direct-Vent systems are among the most efficient of the vented heaters. A Direct-Vent system may be installed as your home’s primary heating system.
Whether you need to heat a single room or an entire home, Empire has Direct-Vent Furnaces to suit your needs. Specifically designed for areas where flues or chimneys are not available or cannot be used. Removable front panels for easy cleaning and servicing. Uses outside air to support combustion. Inside air is warmed as it recirculates around a sealed chamber. This warm air heats the room cleanly and efficiently.
Heat larger areas with Empire’s DV25 Direct-Vent wall furnace. Delivers room-filling warmth; fits against an outside wall. A push of the button ignites the pilot with a matchless piezo system. Add an optional internal blower for even greater air circulation.
What’s Included
- 37″ 25,000 BTU Beige Millivolt With Thermostat Control, Direct Vent Wall Furnace
- Standard Vent Kit Through Outside Wall
- Wall Thermostat (TMV)
Not Included (Sold Separately)
- Blower Kit
- Slim Line Vent Kit
- Gas Conversion Kit
- Vinyl Siding Vent Kit
- Digital Wired Thermostat
- Wall Thermostat Wireless Remote
Features
- Made in USA
- Quiet operation
- Heats without electricity
- Ideal for bedrooms or studies
- Matchless Push button Piezo ignition
- Slim, compact cabinet mounts on an outside wall
- Cost-efficient installation – no chimney is needed
- Total comfort for a fraction of the cost of electric heat
Specifications
| Model |
DV25SGLP |
| Cabinet and Front Panel |
Beige |
| BTU Input |
25,000 |
| Width |
37″ |
| Depth |
11″ |
| Height |
28″ |
| Shipping Weight |
98 lbs |
| Control Options (Optional) |
| Works with Manual, Toggle Switch or Remote Control |
| Minimum Clearances to Combustibles |
| Top |
48″ |
| Each Side |
6″ |
| Bottom of Unit to Floor Covering |
4″ |
| Type of Gas |
Propane |
| Iron Pipe Size (N.P.T.) |
1/2″ |
| Wall to Valve Inlet |
4″ |
| Right Side to Valve Inlet |
N/A |
| Left of Vent to Valve Inlet |
17 11/16” |
| Valve Inlet to Floor Covering |
N/A |
| Wall Depth Minimum |
4 1/2″ |
| Wall Depth Maximum |
13″ |
| Vent Opening in Wall |
6 1/2″ Dia. |
| Center of Vent to Nearest Outside Corner of Building or Obstruction |
24″ |
| Center of Vent from any Opening through which Flue Gases Could Enter a Building |
9″ |
| Bottom of Vent above Grade |
12″ |
| Edge of Vent to Nearest Projecting Surface |
6″ |
| Vent Projection from Outside Wall |
5″ |
| Center of Flue to Floor Covering |
19 3/4″ |
| Pilot and Main Burners include Automatic Shut-off |
Reviews
There are no reviews yet.